Open steel sections:

•  For general purpose and for steel structures

•  For special purpose – on the basis of a separate agreement

Closed steel sections:

•  For general purpose

•  For steel structures

•  For special purpose – on the basis of a separate agreement

Main product groups according to shape:

Open steel sections:

•  U steel sections

•  L steel sections

•  C steel sections

•  Z steel sections

•  S steel sections

Closed steel sections:

•  Round steel sections

•  Square and rectangular steel sections

Other special shaped steel sections

Steel sections can be produced with or without an oil layer on the surface.

Dimensional ranges:

Open steel sections:

U steel sections:

•  ridge height: 20-250 mm

•  material thickness: 1.5-6.0 mm

L steel sections (equal-sided):

•  size of the side: 25-140 mm

•  material thickness: 2.0-5.0 mm

L steel sections (unequal-sided):

•  size of one of the sides: 30-180 mm

•  size of the other side: 20-100 mm

•  material thickness: 1.5-6.0 mm

C steel sections:

•  ridge height: 28-250 mm

•  material thickness: 2.0-5.0 mm

Z steel sections:

•  ridge height: 40-180 mm

•  material thickness: 2.0-4.0 mm

S steel sections:

•  ridge height: 140-180 mm

•  material thickness: 3.0-4.0 mm

Closed steel sections:

Round steel sections:

•  outer diameter: 16-133 mm

Square steel sections:

•  side sizes: 15-100 mm

Rectangular steel sections:

•  sizes of the sides: 20x10 – 150x60 mm

Material thickness of the steel sections: 1.0-4.6 mm

Producible bar length: 5-12 m

Material thickness and producible bar length changes depending on the sizes of steel sections.

Processing facilities:

Precision cutting, burring

•  length: 130-4500 mm

•  outside diameter: 12-80 mm (102 mm)

•  square steel section: 15-60 mm (80 mm)

•  rectangular steel section: 20x10 – 50x30 (100x80 mm)

The value in the brackets is the limit value without burring.

Removing inside welding bead

20-72 mm inside diameter of pipe

Non-destructive testing (NDT) (eddy-current) of materials:

for round steel section with maximum 900 mm outside diameter (according to the standard requirement EN 10246-3). Planning, production and sales activities of cold bent steel section products are realized in systems certified according to EN ISO 9001:2000 quality management and MSZ EN 14001:1997 environment management standards